Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 21/2017
Silent May season,
The following factors influenced “commodity” polymer prices and price expectations last week:
- converters hope that prices will drop further,
- by June all expected lower prices,
- balanced supply,
- converters have reduced the level of their purchases,
- converters try using their inventories purchased earlier,
- therefore demand is weak,
- increasing BRENT oil price, close to 53 USD/barrel
- EUR/USD exchange rate over 1.1 and getting stronger
In detail
The silence of May. Demand is rather summer-like. Converters still keep waiting, they do not buy. Now the pressure to sell is high on polymer producers. As in their direct customer relationships producers try to preserve the price level, they sell superfluous inventories via traders. Consequently there are also very low prices on the market, in case of all grades, with the exception of PE-100 pipe grades. But the market integrates these prices into the expectations for June. In case of polyolefin grades the bottom line of the price range started to drop, making the price range broader. But in case of PS the top line of the price ranges started to drop, therefore here price ranges came to be significantly narrower. Due to the strengthening EUR, in June more imported material from outside of Europe can be anticipated. The cut-throat competition will reduce prices.
Polyolefin grades
The market expects that much that prices will drop further that demand cannot be stimulated by reducing prices. High quantities can be sold at traders only, at prices much below the market price. But these lots made their way back to the market very quickly again, giving a further boost to anticipated price reduction.
Lowe demand for LDPE continued on all markets. We have measured the cheapest prices in the central part of Central Europe: 1,230 € -1,280 €. Supply is good and balanced. The regional CEE average price of the deals made last week is by 10-20 € lower than during the first week of May. There is no LDPE shortage, in spite of Slovnaft being down last week. Because of the lacking demand in Western Europe, plastic converters in CE get a lot of offers from WE.
HDPE supply is abundant, demand is still low. We have experienced no major price reduction, the level of sales is low. The typical price range in the whole region is 1,180-1,280 €. Trader and small warehouse prices are still at about 1,300 €. The prices of HDPE Pipe (100) did not change, the price range is 1,350-1,450 €/ton.
The price of LLDPE C4 has slightly dropped (-10 €), in spite of insufficient quantities on the market. For the time being only SABIC seems to be able to supply smaller quantities. Converters are now confident that with the EUR strengthening the supply situation will improve. The price of mLLDPE is unchanged within a price range of 1,350-1,360 €.
PPH prices are still the lowest in the southern region (Serbia, Romania) here the typical price range is 1,130-1,200 €/ton. For the time being producers want to keep the price level, they do not reduce prices further. But there is remarkably a high quantity of off-grade, off-spec materials on the market. The price of these materials is often by 100-150 € lower than common grades, while there is no major qualitative difference compared to first grade materials. The suspicion arises, whether this is nothing else but a hidden price reduction campaign.
PPC prices also underwent a downward correction. The typical price range is 1,250-1,300 € in the region. On the market there is an increasing number of offers with prices cheaper than this (1,220-1,230 €/t).
PPR supply is stable, there was no price erosion last week. The typical price range is: 1,280-1,360 €, depending on the grade.
The polyolefin market coded a further price drop by 20-40 € for June, in some cases converters buy already at “June prices”.
The prices of the last two weeks are presented in the table below:
Grade name | Polymer price ranges in May, 2017, Central Europe (€/ton) |
HDPE BM | 1,160-1,340 |
HDPE Film | 1,160-1,340 |
HDPE IM | 1,180-1,380 |
HDPE Pipe (100) | 1,350-1,430 |
LDPE Film | 1,250-1,430 |
LDPE GP | 1,250-1,450 |
LLDPE C4 | 1,190-1,260 |
PPC | 1,230-1,340 |
PPH IM | 1,140-1,230 |
PPH Raffia | 1,120-1,220 |
PPR | 1,280-1,360 |
GPPS | 1,250-1,320 |
HIPS | 1,350-1,400 |
EPS | 1,290-1,350 |
Polystyrene grades
Converters try to minimize their demand. In this way their demand is lower than usual. Because of the steep price reduction the extreme values of the price range were pulled apart. The price ranges were corrected last week. The peak of the price range dropped in case of all three grades.
In case of EPS the typical price range is 1,280-1,350 € in Central Europe. Converters expect a further price drop, they try clearing their warehouses.
The typical price range of GPPS sales is 1,250-1,300 €. It is almost impossible to sell above 1,300 EUR. The direction of June is clear, as also feedstock from Egypt and Iran appeared on the market at prices of 1,200-1,220 €/ton.
In case of HIPS demand is good and there is a slight oversupply. Thus prices mover a bit downwards. The typical price range is 1,350-1,400 €/ton.
Market players still expect a further styrene monomer price drop by 50-100 €, which will pull also polymer prices along. Now the problem will be that after a steep fall the SM price will start increasing out of season, during the summer holidays, when it will be difficult for converters and polymer producers as well to pass the price increase on to buyers.
Typ | Cena |
---|---|
HDPE blow molding | 1244 € / t |
HDPE film | 1230 € / t |
HDPE injection molding | 1236 € / t |
HDPE pipe (100) | 1353 € / t |
LDPE film | 1322 € / t |
LDPE general purpose | 1320 € / t |
PP co-polymer injection molding | 1281 € / t |
PP homo-polymer fiber | 1196 € / t |
PP homo-polymer injection molding | 1207 € / t |
PPR | 1337 € / t |
GPPS | 1298 € / t |
HIPS | 1360 € / t |
EPS | 1330 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátPredám: LDPE regranulát zelený
28.05.2024 | ID: 202419263
Predám: PP/PE/CaCO3 regranulát biely
28.05.2024 | ID: 202419262
Predám: HDPE/LDPE regranulát prírodný
28.05.2024 | ID: 202419261
Predám: Regranulačná linka BOCOMATIC EB A 90
28.05.2024 | ID: 202419260
-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE drť, z IBC nádrží
28.05.2024 | ID: 202419256
Kúpim: Výroba gumových, nebo plastových ozubených kolies
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátPredám: LDPE regranulát zelený
28.05.2024 | ID: 202419263
Predám: PP/PE/CaCO3 regranulát biely
28.05.2024 | ID: 202419262
Predám: HDPE/LDPE regranulát prírodný
28.05.2024 | ID: 202419261
Predám: Regranulačná linka BOCOMATIC EB A 90
28.05.2024 | ID: 202419260
-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE drť, z IBC nádrží
28.05.2024 | ID: 202419256
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
04.06.2024
04.06.2024
04.06.2024
04.06.2024
05.06.2024
Ponuky práce
Inžinier analytik vstrekovania plastov - Smartplast s.r.o.
29.05.2024
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024