Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 33/2018
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 72.07 USD/barrel, dropping prices
- EUR/USD: 1.1527, EURO getting weaker
- NAPHTHA: 630,83 USD/t, decreasing prices
- Olefin monomer roll-over:
- Ethylene (C2): roll-over, 1,135 €/t,
- Propylene: (C3): +8 €/t; 1,040 €/t
- SM price increase: +20 €/t; 1,315 €/t
- weak regional currencies,
- high converter inventory levels,
- summerlike demand
Those who wanted to buy have already placed their orders last week. The demand is not too high, it is as usual early August. Because of the high converter inventory levels companies have purchased only the quantities needed for the monthly production. For the time being there are no pre-purchases. Rather the “sit and wait” strategy is typical, both in case of PP and polystyrene grades.
The week ahead of us will be silent, with low demand. A major increase of the demand is to be expected next week, after the 20th of August. Assumedly then converter will be faced with the shutdowns, production limitations expected by September-October. From August 20 to the end of October both MOL and LyondellBasell, and the PKN group plan shutdowns that will significantly affect PP and HDPE production in particular in Central Europe.
The relative HDPE shortage will probably become a total shortage, as in September all three big Central-European producers will shut down their production. In this way even a potential monomer price reduction will not set limits to the HDPE price increase.
PS prices also followed the monomer price increase. But in spite of the expected further price increase also here the demand is summer-like. For the time being also converters wait for further events, a change in the market dynamics is expected after the 20th. Then also prices can start climbing in parallel with the pre-purchases. In the meantime the market is on holiday.
Polyolefin grades
On the LDPE market there were low prices and low demand last week. The prices of polymer producers were, after the deduction of bonuses and rebates, in a range of 1,060-1,160 Euro. Last week the prices offered were in a range of 1,060-1,120 € in the region. Most LDPE producers, following monomer prices, offered roll-over to their buyers. Buyers keep waiting, demand is weak. Most deals were made within a range of 1,090-1,130 € last week.
HDPE supply is very short, in case of BM and MDPE grades in particular. In spite of this the price range remains almost unchanged, though the average price moved by 20 € within the price band. The typical price range is 1,150-1,240 €. For the time being the IM grades are cheaper, yet in September their prices are expected to catch up to the other HDPE prices.
The demand for HDPE (100) pipe is summer-like, the typical price range is 1,400-1,520 €/t, has slightly dropped, most deals are made in the price range of 1,400-1,500 €/t. There was an official price increase, yet in the bottom of the price range most deals are made at a price of about 1,400 Euro.
LLDPE C4 prices did not change, they remained in a range of 1,080 – 1,190 € last week. In Poland the typical trading price range is 1,100-1,130 €. Demand is low, summer-like, supply is not broad either. The Euro being stable at the present keeps prices stable as well. In the first half of August roll-over can be expected.
The price range of mLLDPE was, because of the offers of producers, 1,260-1,400 € last week. The price of grades produced in Europe is 1,290-1,400 €/t, depending on the grade, producer and application area. There is a low quantity of imported materials on the market, but cheap “pre-marketing” goods from West-Europe appeared on the market in a price range of 1,200-1,240 €.
PPH prices stabilized on a level higher than 1,200 €, the typical price range was 1,220-1,380 €. Demand is low, as usual in August. Converters look for cheaper alternatives, the demand for off-grade, off-spec and near to prime materials is increasing.
PPC consumers are unsatisfied, they did not get offers at prices below 1,300 € last week, the price increase by 20 € was accepted on the market. In Central-Europe last week the price range was 1,300-1,440 €/t, depending on the grade and application area. Most converters play the survivor’s game, they buy only the quantities needed. Because of the expected shutdowns supply getting shorter and stable, slightly increasing prices can be anticipated. The chances for price reduction are low.
The typical PPR price range is 1,300-1,460 €/t, depending on the grade, producer and application area. Typically there was a price increase by 20 €. The demand is not too high.
The prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the first week Aug and first week of August, 2018, Central Europe (€/ton |
HDPE BM | 1,150-1,250 |
HDPE Film | 1,150-1,250 |
HDPE IM | 1,130-1,250 |
HDPE Pipe (100) | 1,400-1,540 |
LDPE Film | 1,060-1,200 |
LDPE GP | 1,060-1,200 |
LLDPE C4 | 1,080-1,190 |
PPC | 1,300-1,440 |
PPH IM | 1,200-1,380 |
PPH Raffia | 1,220-1,300 |
PPR | 1,300-1,460 |
GPPS | 1,300-1,490 |
HIPS | 1,380-1,550 |
EPS | 1,500-1,560 |
Polystyrene grades
In case of EPS there was an average increase by 20 € last week. The demand is not too high, it is still highest in the Czech Republic and in Poland, yet the holiday season impacts the market. The typical offer price range in Central Europe is 1,520-1,590 €/t. Increasing demand and potentially a price increase can be anticipated after August 20.
The price of GPPS and HIPS increased by 20 € each, following the monomer price increase. Yet the demand was still low last week. The average price of GPPS produced in Europe is in a range of 1,380- 1,500 €. But in the southern region GPPS produced in Russia is available again, its price is close to 1,300 €. In this way the price scissor between materials imported from outside of the EU and goods produced in the EU opens again. HIPS prices are in a range of 1,460-1,600 EUR. In the second half of August we expect the demand to grow.
Typ | Cena |
---|---|
HDPE blow molding | 1181 € / t |
HDPE film | 1190 € / t |
HDPE injection molding | 1179 € / t |
HDPE pipe (100) | 1457 € / t |
LDPE film | 1126 € / t |
LDPE general purpose | 1132 € / t |
PP co-polymer injection molding | 1327 € / t |
PP homo-polymer fiber | 1232 € / t |
PP homo-polymer injection molding | 1241 € / t |
PPR | 1361 € / t |
GPPS | 1416 € / t |
HIPS | 1511 € / t |
EPS | 1537 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
05.03.2024 | ID: 202418726
Top inzerát -
26.04.2024 | ID: 202419032
Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
Kúpim: Balíková LDPE fólia ,500 t/mesiac
22.04.2024 | ID: 202419013
Kúpim: Špinavý zvyškový granulát z podláh
22.04.2024 | ID: 202419011
-
17.04.2024 | ID: 202418988
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
-
11.04.2024 | ID: 202418943
Kúpim: PET odrezky z výroby, tácky, iba transparent
10.04.2024 | ID: 202418939
Kúpim: PA6.6 GF25, TECHNYL A218, originál
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top inzerát Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
Predám: HDPE fólia v rolkách 30 t
22.04.2024 | ID: 202419021
Predám: PA 6.6 Ultramid A3U42G6 drť
22.04.2024 | ID: 202419020
Najbližšie výstavy
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapešť
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB - Bukurešť 2024
14.05.2024 - 17.05.2024 | Bukurešť
23.04.2024
23.04.2024
23.04.2024
23.04.2024
06.05.2024
23.04.2024
Mitsubishi Electric organizuje Inžiniersky workshop: Využitie prediktívnej údržby v pohonoch
23.04.2024
Vstrekovanie plastov pre netechnológov
24.04.2024
Školenie - Konštruktér plastových dielov
25.04.2024
Vtokové systémy vstrekovacích foriem, organizovaný spoločnosťou Plasty Gabriel s.r.o.
25.04.2024
Ponuky práce
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024
Supervisor logistiky, skladu a expedície - KNP s.r.o.
09.04.2024
Skladník - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Obchodný zástupca / špecialista predaja - Plastcom, spol. s r.o.
04.04.2024
Údržba a obsluha chodu výrobnej linky - Plastcom, spol. s r.o.
04.04.2024
Technik kontroly kvality - ESOX-PLAST s.r.o.
04.04.2024
Majster odborného výcviku - ESOX-PLAST s.r.o.
04.04.2024
Manažér obchodu - Ecocycle s.r.o
25.03.2024