Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 40/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 62.74 USD/barrel, dropping prices
- EUR/USD: 1.0941 further weakening of the euro
- NAPHTHA (European): 479.61 USD/t, decreasing prices
- The market is already waiting for October monomer prices,
- Polymer producers have made minor end-of-month price adjustments. LDPE, PP increase, while PS price reduction
- Unexpected malfunction of MOL PP4 (force majeure),
- Force majeure at LyondellBasell Carrington PP
The explosion at Aramco in Saudi Arabia did not shake the polymer markets. Some of the larger customers just started buying in advance, building up inventories for precaution. Oil and NAPHTHA prices are slowly correcting. NAPHTHA prices are by 7-8% higher than a month ago. This is a good predictor of higher ethylene (C2) and propylene (C3) prices. Market players expect a price increase of 20-30 € / t for both monomers.
The most important event of the past week was the failure at the plant of MOL in Tiszaújváros, which resulted in the shutdown of its PP4 plant (capacity 180 kt/year). This mainly affects PPH, PPR and certain PPC grades. The downtime is also unpleasant because the major overhaul at the site of MOL in Tiszaújváros has just been completed. Polymer stores are empty. It is not yet known how long the downtime will last. However, in the week ahead most certainly. In the event of a prolonged repair, it may even be necessary to postpone the major overhaul at Slovnaft due from mid-October at the PP and LDPE plants. In addition, due to the significantly reduced use of propylene, the capacity of the cracker may need to be reduced temporarily at MOL's Tiszaújváros site. Which can also affect HDPE production.
Due to the loss of the largest PP production capacity in Central Europe, it is necessary to prepare for a narrow PP supply in Central Europe. The situation is only exacerbated by the reduced production at LyondellBasell's Carrington plant. The reduced PP production due to Braskem's now-ongoing propylene supply problems is further narrowing the PP supply.
Polymer producers have already announced their price concepts for October in advance. Central European producers increased prices by € 30-50 last week. This predicts the October price increase and its extent. However the price change still depends on the change of monomer price. If monomer prices rise, then a price increase following monomer prices can be anticipated in case of polyethylene grades and for polypropylene a price increase exceeding monomer price change can be expected.
In the PS market, the opposite is true. After an unsuccessful price increase following monomer prices in September, polymer producers began to adjust their prices last week. In the SM market, one week before the actual price announcement, an SM price change by 0 -20 €/t seems to be the most likely scenario.
Polyolefin grades
LDPE prices were in a range of 930-1,020 €/t last week. There was no change. Demand is low. Converters do not believe in price increases. Therefore there were no pre-purchases yet. Only a few major producers are trying to secure themselves by October. However, a preliminary October price increase of € 30-50 will put a stop to transactions.
Typical HDPE prices were in a range of 940 - 1,090 €/t in Central Europe last week. The HDPE producer in the southern region has sold its stocks. The force majeure at the PP plant of MOL may also have an impact on HDPE production. The supply may become uncertain. The stronger dollar is weakening the competitiveness of imports from outside Europe. After the explosion at Aramco in Saudi, traders tried to raise prices without success. However, demand for HDPE is low and this may hold back price increases, even in the case of monomer price increases. In the meantime there is a temporary shortage of well-known grades. It can help increase prices.
Typical HDPE BM list prices in Central Europe were in a range of 940-1,060 €/t last week. They did not change. Demand is low. Typical HDPE IM prices were in a range of 960 - 1,050 €/t in Central Europe. HDPE Film grade prices were in a range of 930-1,090 €/t in Central-Europe last week. They did not change compared to last week. Demand is low.
Typical HDPE (100) prices were in a range of 1,220-1,300 €/t last week. Prices have not changed. Lower demand is expected in October than in September. The season is coming to an end. Converters expect roll-over in polymer prices.
The typical LLDPE C4 prices were in a range of 920-1,040 €/t last week, depending on the grade and application area. Prices rose slightly due to the strengthening of the dollar.
mLLDPE (C6) prices were in a range of 1,050-1,200 €/t last week. There was no change. Supply is good. Demand has been weak over the past week and is not expected to pick up in October. This in turn keeps prices down.
PPH prices were in a range of 965-1,130 €/t in Central-Europe last week. Demand was sluggish. Distributors and traders in particular reported sales difficulties. Although several Western European producers have tried to raise prices, this has failed due to customer resistance. Supply is broad. Converters can buy easily.
Typical PPH Raffia prices were in a range of 965-1,050 €/t. The end of the month turned exciting due to MOL force majeure. A tight supply is expected in the coming weeks. If the shortage will be lasting. In this way regionally a rise in prices is possible, separated from European trends.
The price of non-special PPM IM products with medium melt index was in a range of 980-1,110 €/t. High flow index prices rose slightly in the price range of 1,060-1,180 EUR/t. There was no change compared to last week. Monomer-following price increases are expected.
Typical prices increased slightly, PPC prices ranged from 1,150 to 1,200 €/t in Central Europe. They rose slightly due to the disappearance of cheaper items from the market. Demand is low. Buyers focus on October prices. Only a monomer price increase combined with a temporary shortage could pull the PPC market out of the low demand-low price situation of recent months.
PPR demand was weak last week. Prices were in a range of 1,170-1,280 €/t. Supply became uncertain in October due to MOL's force majeure. This can have a significant impact on prices. A price increase in excess of the monomer price change is likely.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the fourth week of Sept 2019, Central Europe (€/ton) |
HDPE BM | 940-1060 |
HDPE Film | 940-1090 |
HDPE IM | 960-1050 |
HDPE Pipe (100) | 1220-1300 |
LDPE Film | 930-1020 |
LDPE GP | 930-1020 |
LLDPE C4 | 940-1040 |
mLLDPE C6 | 1050-1200 |
PPC | 1130-1200 |
PPH IM | 980-1110 |
PPH IM HMFR | 1060-1130 |
PPH Raffia | 965-1050 |
PPR | 1170-1280 |
GPPS | 1140-1240 |
HIPS | 1185-1350 |
EPS | 1180-1250 |
ABS | 1430-1590 |
Polystyrene grades
EPS prices were in a range of 1,180-1,250 €/t last week. As the September price increase was only fragmented, polymer producers began adjusting polymer prices to reality by the end of September. According to some, the season is practically over without starting. We are expecting falling prices in October.
Typical GPPS prices were in a range of 1,140-1,200 €/t, while HIPS prices were in a range of 1,185-1,310 €/t . Demand for HIPS is very weak, while GPPS is up for the season. There is no non-European material on the market. However, no price increases or roll over are expected. In fact, converters say a price reduction of up to EUR 20 could occur.
ABS prices were in a price range of 1,430-1,590 € last week. They did not change. Demand is low. Supply is very broad. There is a wide variety of non-European materials on the market and prices are very variable. Price rises are unlikely in October.
Typ | Cena |
---|---|
HDPE blow molding | 1020 € / t |
HDPE film | 1027 € / t |
HDPE injection molding | 1034 € / t |
HDPE pipe (100) | 1252 € / t |
LDPE film | 964 € / t |
LDPE general purpose | 976 € / t |
PP co-polymer injection molding | 1158 € / t |
PP homo-polymer fiber | 1008 € / t |
PP homo-polymer injection molding | 1040 € / t |
PPR | 1223 € / t |
GPPS | 1172 € / t |
HIPS | 1262 € / t |
EPS | 1219 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024