Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 28/2018
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 77.11 USD/barrel, stagnating prices
- EUR/USD: 1,1744, Euro still getting weaker,
- NAPHTHA: 650.08 USD/t, slightly increasing prices
- partially dropping contract monomer prices in July
- Ethylene (C2): 1,135 €/t (∆:-15€/t)
- Propylene (C3): 1,032 €/t (∆: 0.0 €/t)
- Styrene monomer (SM) 1,295, -50,0 €/t
- weak regional currencies,
The response of polymer producers to monomer price changes was not clear. The typical demand for LDPE is still extremely low and we have to anticipate this also during the summer months. This might mean again polymer prices close to the monomer prices and by the middle of August even lower prices than that on the spot market. There is a significant demand for “prime” materials, for the time being it cannot be expected to grow significantly. In case of HDPE producers did not change prices as demand is good. However converters buying in regional currencies experienced price increase, the currencies getting weaker have an impact on the market. The Serbian producer is forced to decrease its prices to adapt to the market prices. The price of LLDPE is clearly being moved by the weakening of currencies compared to the USD, in this way the price has been continuously increasing for two months.
Rather roll-over is typical for PP, in spite of the fact that the Polish producer decreased its prices by 20-30 Euro. Converters are hesitant to accept high prices. More and more companies blend prime material with off-grade material to make the finished product cheaper. Also PP producers feel frustration on the market, and even if not on system-level, there are possibilities for minor, individual price decrease.
The reduction of SM prices by 50 € was accompanied by a similar PS price reduction. The biggest CE producer reduced its prices by 50-70 Euro, while the other one by only 20-50 Euro. Because of the weakening of the USD the quantity of import products is low on the market, and what is available is also relatively expensive.
The high oil and NAPHTHA prices will persist through the summer, which keeps the high monomer prices up, and by the end of the summer also the increase of SM prices is expected. For the time being no price reduction is expected, we anticipate almost unchanged prices by the end of August.
Polyolefin grades
LDPE prices still depend on the demand. But the demand is very low. This means a low price close to that of monomer. This means a price range of 1,150-1,200 € in the central region. In the SCE region local producers have further reduced their prices, here the price range is 1,130-1,170 €. In Poland we have measured typical prices in a range of 1,120-1,170 €.
HDPE supply is still short. In this way polymer producers tried to keep the prices on the level of last month. This means a price range of 1,170-1,220 €/t. In the southern region the Serbian producer is forced to decrease its prices to adapt to the market. Price reduction is typical for the Polish market only, in spite of the short supply. The Polish producer came up with a price reduction following or even exceeding monomer prices, which pulled also the prices of others down. In this way HDPE prices dropped into a price range of 1,110-1,170 €/t.
The demand for HDPE (100) pipe is good, the typical price range of 1,420-1,550 €/t did not change, but the average price has slightly dropped, which is due to the correction of the high June prices.
LLDPE C4 prices remained, for the time being, in a price range of 1,080 – 1,190 €. The weakening of the Euro came to a halt. But in the course of the summer we expect the Euro to get weaker. This pulls also prices upwards. We have measured the cheapest prices in Poland, in a range of 1,080-1,140 €.
mLLDPE prices remained on the June price level, in the range of 1,290-1,400 €/t, depending on the grade, producer and application area.
In case of PPH there was typically roll-over. The typical price range is 1,180-1,250 € depending on the grade and application area. The quantity of import is low at the present, there is almost nothing from outside of Europe and materials from Russia are also represented in low quantities. Only WE and Russian producers increased prices by up to 20 Euro. The prices of CE PP producers start at 1,200 €.
In case of PPC there was typically roll-over. Only the Polish PPC producer reduced prices. The typical price range in June is 1,250-1,350 €/ton, depending on the grade, producer and application area. But material from South-Korea appeared on the market, via trader, at a price of about 1,300 €.
The typical PPR price range is 1,310-1,440 €/t, depending on the grade, producer and application area. There was roll-over.
The prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the first week July, 2018, Central Europe (€/ton) |
HDPE BM* | 1,170-1,250 |
HDPE Film* | 1,170-1,250 |
HDPE IM* | 1,150-1,250 |
HDPE Pipe (100) | 1,420-1,540 |
LDPE Film | 1,140-1,250 |
LDPE GP | 1,140-1,250 |
LLDPE C4 | 1,080-1,200 |
PPC | 1,250-1,400 |
PPH IM | 1,190-1,330 |
PPH Raffia | 1,200-1,260 |
PPR | 1,320-1,440 |
GPPS | 1,380-1,500 |
HIPS | 1,500-1,600 |
EPS | 1,470-1,550 |
*Polish prices show a lower price by 30-40 € lower.
Polystyrene grades
EPS demand was low last week. Converters waited for prices. The average price reduction by 50 € and the insulation season that is at hand will probably increase the demand. The typical price range remained 1,470-1,570 €.
The demand for GPPS and HIPS was weak last week. Summer holidays are “palpable”. It is not by chance that also big WE producers decreased prices following monomer prices. For the time being importers sit and wait for events upcoming with price announcements. The price of GPPS produced in Europe is in a range of 1,420- 1,520, and that of HIPS in a range of 1,460-1,550. The price of import products should compete with these prices.
Typ | Cena |
---|---|
HDPE blow molding | 1182 € / t |
HDPE film | 1191 € / t |
HDPE injection molding | 1195 € / t |
HDPE pipe (100) | 1483 € / t |
LDPE film | 1174 € / t |
LDPE general purpose | 1161 € / t |
PP co-polymer injection molding | 1325 € / t |
PP homo-polymer fiber | 1231 € / t |
PP homo-polymer injection molding | 1241 € / t |
PPR | 1349 € / t |
GPPS | 1429 € / t |
HIPS | 1517 € / t |
EPS | 1516 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024