Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 30/2018
Low demand, melting prices
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 72.58 USD/barrel, slightly dropping prices
- EUR/USD: 1.1642, EURO getting weaker
- NAPHTHA: 632.78 USD/t, slightly increasing prices
- weak regional currencies,
- summerlike demand
The main holiday season continues. Both sellers and buyers are on holiday. There was a low number of transactions and silence on the market.
With the exception of HDPE the demand for all polymer grades is low. Sellers reacted to this with minor price reduction. The market seems to break apart again into Poland and into other CE countries. Polish prices are still the lowest ones, in case of polyolefin grades by 30-50 Euro lower than in the other countries of the region. In case of PS there is no significant difference.
Converters have a good level of orders, their inventories are satisfactory, they anticipate continuous supply, and they are not concerned because of the shutdowns expected during the next 3 months.
The following shutdowns can be expected:
- MOL Petrolkémiai Zrt. OLEFIN-2 plant in September, affecting also PP and HDPE production.
- Slovnaft PP3 October 15-30,
- Unipetrol PP capacity reduction in August,
- BOP HDPE shutdown as of the middle of September.
In the meantime in WE LyondellBasell is preparing for shutdowns in Wesseling as of the middle of September, in Ferrara as of early November. All this will significantly cut supply.
As far as expectations for August are concerned, roll-over has the highest probability in case of olefins and in case of SM a slight price increase is possible.
Polyolefin grades
In Poland LDPE prices started dropping, cheapest offers are below 1,100 €. The typical price range in Poland is 1,100-1,150 €/t. In the central region prices are melting, we have measured prices in a range of 1,120-1,180 €. Supply is abundant. LDPE producers still have significant inventories.
HDPE supply is still short. In case of BM grades in particular. This week goods were not available at HIP-Petrochemical either. But neither MOL nor WE producers could take new orders.
The typical price range is: 1,170-1,220 €/t. The price range is by some 30-50 Euro lower on the Polish market. Here the price range is 1,110-1,170 € depending on the grade and application area.
The demand for HDPE (100) pipe is good for the middle of the summer, the typical price range of 1,420-1,550 €/t did not change, most deals are made in the price range of 1,420-1,500 €/t.
LLDPE C4 prices did not change, they are in a range of 1080 – 1,190 €. Demand is low, supply is not broad either. The Euro being stable at the present keeps prices stable as well.
mLLDPE prices remained on the June price level, in the range of 1,290-1,400 €/t, depending on the grade, producer and application area. Import grades from outside of Europe are missing on the market.
PPH demand dropped last week. The reasons can clearly be traced back to the holiday season. The typical price range is 1,180-1,260 € depending on the grade and application area. There is import on the market, the weakening of regional currencies came to a halt at the present and getting stronger, resp. which again keeps lowest prices at a level of about 1,180.
PPC demand is still low. The lowest prices are in a range of 1,250-1,310 €/ton, depending on the grade, producer and application area. In the other parts of Central-Europe we have measured a typical price range of 1,280-1,350 €.
The typical PPR price range is 1,280-1,440 €/t, depending on the grade, producer and application area.
The prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week July, 2018, Central Europe (€/ton) |
HDPE BM | 1,170-1,250 |
HDPE Film | 1,170-1,250 |
HDPE IM | 1,150-1,250 |
HDPE Pipe (100) | 1,420-1,540 |
LDPE Film | 1,080-1,250 |
LDPE GP | 1,090-1,250 |
LLDPE C4 | 1,080-1,200 |
PPC | 1,250-1,400 |
PPH IM | 1,190-1,330 |
PPH Raffia | 1,180-1,260 |
PPR | 1,300-1,440 |
GPPS | 1,320-1,490 |
HIPS | 1,380-1,550 |
EPS | 1,470-1,550 |
Polystyrene grades
EPS demand is still low. It can be sold only by decreasing the prices by 20-30 € exceeding SM. Demand is very low in Central Europe. The typical offer price range is 1,470-1,570 €. Some converters have already started buying in advance, at probably the lowest price level of the year. In August we expect the demand to grow and minor price increase following monomer prices.
The demand for GPPS and HIPS was still weak last week. The average price of GPPS produced in Europe has dropped further, though the price range is 1,380- 1,490 €, most deals are made at about 1,400 €. HIPS prices are in a range of 1,440-1,550 EUR. Prices did not change compared to last week.
Typ | Cena |
---|---|
HDPE blow molding | 1182 € / t |
HDPE film | 1191 € / t |
HDPE injection molding | 1195 € / t |
HDPE pipe (100) | 1461 € / t |
LDPE film | 1159 € / t |
LDPE general purpose | 1159 € / t |
PP co-polymer injection molding | 1314 € / t |
PP homo-polymer fiber | 1218 € / t |
PP homo-polymer injection molding | 1224 € / t |
PPR | 1349 € / t |
GPPS | 1398 € / t |
HIPS | 1491 € / t |
EPS | 1512 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
05.03.2024 | ID: 202418726
Top inzerát -
26.04.2024 | ID: 202419032
Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
Kúpim: Balíková LDPE fólia ,500 t/mesiac
22.04.2024 | ID: 202419013
Kúpim: Špinavý zvyškový granulát z podláh
22.04.2024 | ID: 202419011
-
17.04.2024 | ID: 202418988
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
-
11.04.2024 | ID: 202418943
Kúpim: PET odrezky z výroby, tácky, iba transparent
10.04.2024 | ID: 202418939
Kúpim: PA6.6 GF25, TECHNYL A218, originál
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top inzerát Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
Predám: HDPE fólia v rolkách 30 t
22.04.2024 | ID: 202419021
Predám: PA 6.6 Ultramid A3U42G6 drť
22.04.2024 | ID: 202419020
Najbližšie výstavy
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapešť
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB - Bukurešť 2024
14.05.2024 - 17.05.2024 | Bukurešť
23.04.2024
23.04.2024
23.04.2024
23.04.2024
06.05.2024
23.04.2024
Mitsubishi Electric organizuje Inžiniersky workshop: Využitie prediktívnej údržby v pohonoch
23.04.2024
Vstrekovanie plastov pre netechnológov
24.04.2024
Školenie - Konštruktér plastových dielov
25.04.2024
Vtokové systémy vstrekovacích foriem, organizovaný spoločnosťou Plasty Gabriel s.r.o.
25.04.2024
Ponuky práce
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024
Supervisor logistiky, skladu a expedície - KNP s.r.o.
09.04.2024
Skladník - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Obchodný zástupca / špecialista predaja - Plastcom, spol. s r.o.
04.04.2024
Údržba a obsluha chodu výrobnej linky - Plastcom, spol. s r.o.
04.04.2024
Technik kontroly kvality - ESOX-PLAST s.r.o.
04.04.2024
Majster odborného výcviku - ESOX-PLAST s.r.o.
04.04.2024
Manažér obchodu - Ecocycle s.r.o
25.03.2024