Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 4/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 61.18 USD/barrel, stagnating prices
- EUR/USD: 1.1392, EURO getting weaker
- NAPHTHA: 460.89 USD/t, decreasing prices
- Demand is as usual in January, below the average.
- Increasing SPOT monomer olefin and SM prices
- Ethylene (C2) spot price (FD NWE): +40 EUR/t compared to one week ago (785 EUR/t),
- Propylene (C3) spot price (FD NWE): +5 EUR/t compared to one week ago (905 EUR/t), compared to the beginning of the month an increase by 30 Euro
- Styrene monomer (SM) spot price (FOB Rotterdam): +10 USD/t compared to one week ago (950 USD/t),
- Broad polyethylene and polypropylene supply.
Last week prices for January came to be clear-cut. In case of polyethylene grades this meant a clear further price drop in terms of average prices. The bottom line of price ranges did not move significantly downwards. Rather the average buying price dropped a bit. In case of polyethylene grades now the signs of import from overseas, first of all from America are clearly visible. These are no longer the ad hoc import quantities, but the first shipments, samples from new polyethylene plants being started up. European converters make friends with names like Westlake Chemicals. In the area of LDPE the Autoclave technology is well known also in our region. LDPE produced in this way is particularly good to use in older extruders. Lowest HDPE prices are offered by polymer producers located in South-Korea. Central-European producers follow prices below 1,100 € in case of some products only. The same feedstock and spot ethylene price would in normal case pull up price expectations in February. Yet the ever increasing import supply curbs price increase. In this way it is no coincidence that plastic converters do not anticipate a major price increase. They rather think there will be a minor price correction by 15-30 € in February. In this way they are not prompted to buy in advance for February.
Propylene sale prices remained as they were last week. There was no significant up- or downwards movement. Demand is low. Supply is good. The increase of spot propylene prices did not boost the willingness to buy, similar to ethylene. Polymer producers and distributors expect a minor price increase in February.
The price of SM grades has hit bottom, but for the time being there is no sign of a significant price increase on the spot market. The volatility of recent years is floating above the market, yet spot SM prices have been stable for a month. For the time being there is no sign of major change. PS demand can be deemed to be good, for European grades in particular, but supply is not sufficient. It is a paradox situation that now the price of materials coming from outside of Europe is similar to or is slightly higher than the price of European producers. For the time being the market anticipates “roll-over” for February.
In detail
Polyolefin grades
Typical LDPE prices were in a range of 970-1,050 €/t last week. The price of more special grades with additives was as high as 1,080 Euro. The demand is not too high, supply is good. Slovnaft Bralen grades are still short of supply. But the supply of these grades is also continuously improving.
In Central Europe the typical HDPE prices were in a range of 1,050-1,160 €/t last week. Cheapest prices were in Poland and in the Czech Republic. HDPE IM prices start from 1,050 Euro, but they were typically in a range of 1,070-1,120 €/t. HDPE Film and BM prices were in a range of 1,050-1,160 €/t. They are the cheapest in the SCE region. Demand is low.
The typical HDPE (100) prices in January are in a range of 1,250-1,320 €/t. Demand is low.
LLDPE C4 prices were in a range of 980 - 1,070 €/t last week. There was no major price difference between the individual regions. Demand is low.
MLLDPE prices are in a range of 1,150-1,340 €/t. Supply is broad, in the region the products of all major producers are available.
PPH prices were in a range of 1,100-1,240 €/t last week. The demand came to be somewhat weaker compared to the second week of January. Prices are still balanced. PPH Raffia prices were in a range of 1,100-1,190 €/t. The price range of non-special PPM IM products with medium melt index was 1,120-1,210 €/t. The prices of products with high melt index were in a range of 1,180-1,250 €/t last week. There is just a low quantity of imported goods from outside of Europe in the region.
Typical prices of PPC grades were in a range of 1,220-1,300 €/t in Central-Europe last week. The price band has slightly dropped. “Near to prime” materials are available again, but they are less popular because of the diminishing price difference. Extrusion (pipe) grades are cheapest, their seasons has not come yet.
The PPR price range was 1,240-1,360 €/t, depending on the grade, producer and application area last week. The demand for pipe grades is low.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week of January, 2019, Central Europe (€/ton) |
HDPE BM | 1,070-1,180 |
HDPE Film | 1,050-1,160 |
HDPE IM | 1,050-1,140 |
HDPE Pipe (100) | 1,240-1,320 |
LDPE Film | 970-1,180 |
LDPE GP | 970-1,150 |
LLDPE C4 | 980-1,060 |
PPC | 1,220-1,330 |
PPH IM | 1,120-1,210 |
PPH Raffia | 1,100-1,190 |
PPR | 1,260-1,360 |
GPPS | 1,170-1,220 |
HIPS | 1,200-1,280 |
EPS | 1,230-1,320 |
Polystyrene grades
The polystyrene market is Janus-faced:
Last week in Central Europe EPS prices were in a range of 1,230-1,320 €/t. A slight price reduction following monomers was typical. The price change was a bit delayed. Probably because purchases have started last week.
GPPS prices were typically in a range of 1,160-1,230 €/t last week. Polymer grades produced in Europe will slowly be sold out. Synthos still have available stocks, but the other producers take no more orders for January. There is an abundance of goods from the Near-East and Egypt on the market, but these offer no price advantage, what is more, they are on the average even more expensive than European products. HIPS prices are in a range of 1,210-1,280 €/t. Supply is limited also here, but demand is good. Yet price sensitivity is extreme.
Typ | Cena |
---|---|
HDPE blow molding | 1117 € / t |
HDPE film | 1119 € / t |
HDPE injection molding | 1119 € / t |
HDPE pipe (100) | 1296 € / t |
LDPE film | 1018 € / t |
LDPE general purpose | 1018 € / t |
PP co-polymer injection molding | 1255 € / t |
PP homo-polymer fiber | 1174 € / t |
PP homo-polymer injection molding | 1179 € / t |
PPR | 1297 € / t |
GPPS | 1181 € / t |
HIPS | 1225 € / t |
EPS | 1286 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
05.03.2024 | ID: 202418726
Top inzerát Spolupráca: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
-
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
-
17.04.2024 | ID: 202418988
-
17.04.2024 | ID: 202418987
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
-
16.04.2024 | ID: 202418984
-
17.04.2024 | ID: 202418988
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
Kúpim: Balíková LDPE fólia ,500 t/mesiac
15.04.2024 | ID: 202418966
Kúpim: Špinavý zvyškový granulát z podláh
15.04.2024 | ID: 202418964
-
11.04.2024 | ID: 202418943
Kúpim: PET odrezky z výroby, tácky, iba transparent
10.04.2024 | ID: 202418939
Kúpim: PA6.6 GF25, TECHNYL A218, originál
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
09.04.2024 | ID: 202418924
-
05.03.2024 | ID: 202418726
Top inzerát -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
-
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
Predám: PP vstrekovací - drť biela
15.04.2024 | ID: 202418979
Predám: Drť EVA Escorene UL00514
15.04.2024 | ID: 202418978
Najbližšie výstavy
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
16.04.2024
16.04.2024
17.04.2024
17.04.2024
22.04.2024
Festival personalistov a rozvoja talentov
16.04.2024
17.04.2024
Školenie - Technológia vstrekovania II.
17.04.2024
17.04.2024
Školenie - Ako na praskanie plastov
22.04.2024
Ponuky práce
-
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024
Supervisor logistiky, skladu a expedície - KNP s.r.o.
09.04.2024
Skladník - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Obchodný zástupca / špecialista predaja - Plastcom, spol. s r.o.
04.04.2024
Údržba a obsluha chodu výrobnej linky - Plastcom, spol. s r.o.
04.04.2024
Technik kontroly kvality - ESOX-PLAST s.r.o.
04.04.2024
Majster odborného výcviku - ESOX-PLAST s.r.o.
04.04.2024
Manažér obchodu - Ecocycle s.r.o
25.03.2024